How Much Does Face brick Weigh?
Clay face brick used for exterior veneer. Same nominal dimensions as common brick (7.625"×3.625"×2.25") but higher-fired; approximately 3.8 lbs each.
Face brick is the brick you actually see — chosen for color, texture, and finish rather than raw structural duty. It's fired at higher temperatures than common brick, which tightens the clay body and gives it a cleaner, more consistent face for exterior walls and facades.
Face brick shares the same nominal footprint as common brick, about 7.625 x 3.625 x 2.25 inches, but typically runs lighter, around 3.8 pounds per unit. The tighter firing process and closer quality control shave off some weight compared to the coarser common brick behind it.
What Face brick Is Used For
- Exterior wall veneer and street-facing facades
- Accent bands, soldier courses, and decorative trim
- Chimney exteriors and visible fireplace surrounds
- Mailbox and column facing
- Thin veneer applications over block or wood-framed walls
- Restoration and infill matching on older brick buildings
Weight Facts
- Weight per piece
- 3.8 lbs
- Category
- Brick & Pavers
How Much Face brick Can Each Truck Carry?
| Truck | Payload | Safe max (pieces) |
|---|---|---|
| Ford Maverick | 1,500 lbs | 394 |
| Honda Ridgeline | 1,500 lbs | 394 |
| Chevrolet Colorado (2nd Gen) | 1,400 lbs | 368 |
| Chevrolet Colorado (3rd Gen) | 1,500 lbs | 394 |
| GMC Canyon (2nd Gen) | 1,400 lbs | 368 |
| GMC Canyon (3rd Gen) | 1,450 lbs | 381 |
| Ford Ranger | 1,560 lbs | 410 |
| Nissan Frontier | 1,160 lbs | 305 |
| Toyota Tacoma | 1,100 lbs | 289 |
| Jeep Gladiator | 1,200 lbs | 315 |
| Ford F-150 | 1,525 lbs | 401 |
| Chevrolet Silverado 1500 | 1,600 lbs | 421 |
| GMC Sierra 1500 | 1,500 lbs | 394 |
| RAM 1500 | 1,240 lbs | 326 |
| Toyota Tundra | 1,485 lbs | 390 |
| Nissan Titan | 1,460 lbs | 384 |
| Ford F-250 Super Duty | 3,000 lbs | 789 |
| Ford F-350 Super Duty (SRW) | 4,000 lbs | 1052 |
| Ford F-350 Super Duty (DRW) | 5,500 lbs | 1447 |
| Chevrolet Silverado 2500HD | 3,200 lbs | 842 |
| GMC Sierra 2500HD | 3,200 lbs | 842 |
| Chevrolet Silverado 3500HD (DRW) | 5,700 lbs | 1500 |
| GMC Sierra 3500HD (DRW) | 5,700 lbs | 1500 |
| RAM 2500 | 1,950 lbs | 513 |
| RAM 3500 (DRW) | 6,280 lbs | 1652 |
Hauling Face brick: What to Know
At under 4 pounds a brick, face brick feels deceptively manageable to carry by hand — but a full pallet still adds up fast. A standard pallet of roughly 500 bricks lands around 1,900 pounds, and larger jobs ordering two pallets at once push past 3,800 pounds, more than most half-ton trucks can legally carry.
Because face brick is often delivered in smaller, curated quantities for a specific pattern or color run, it's tempting to think the load is light. Weigh the actual order, not just the per-brick number, and keep pallets low and forward over the axle rather than stacked high near the tailgate.
Buying & Ordering Face brick
Face brick is sold by the piece for small repair jobs, by the pallet for full facades, or quoted by square foot of wall coverage when ordering through a masonry supplier — color and texture runs can vary between batches, so buy from one lot for a consistent look. For full-pallet or multi-pallet orders, have the yard arrange flatbed delivery instead of hauling it yourself in stages.
Calculate Your Load
“Fill Truck” sets quantity to whichever comes first: payload weight limit or bed volume.
✓ Within Capacity — 1,496 lbs remaining
This load is within the published payload rating. Always account for passengers, fuel, and bed accessories in your total.
Standard AWD EcoBoost payload. Tremor drops to ~1,140 lbs; the 2025+ Lobo off-road trim is lower still (~1,045 lbs). Check door-jamb sticker.
Face brick — Frequently Asked Questions
- Why is face brick lighter than common brick if they're the same size?
- Face brick is fired at higher, more controlled temperatures and finished more precisely, which produces a denser but thinner-walled unit — roughly 3.8 pounds versus about 4.5 pounds for common brick.
- How much does a pallet of face brick weigh?
- A typical pallet of about 500 face bricks weighs approximately 1,900 pounds, close to or exceeding the payload limit of many half-ton pickups on its own.
- Can I mix face brick from different pallets in one wall?
- It's not recommended — color and firing can shift between production runs, so buy a single lot's worth in one order to avoid visible patchiness, and factor that combined weight into your delivery plan.
- How much does Face brick weigh per piece?
- Face brick weighs approximately 3.8 lbs per piece. Clay face brick used for exterior veneer. Same nominal dimensions as common brick (7.625"×3.625"×2.25") but higher-fired; approximately 3.8 lbs each.
- How much Face brick can a half-ton truck carry?
- A typical half-ton truck with a 1,500 lb payload can safely carry about 394 pieces of Face brick.
Related Material Weights
Helpful Guides
- Cubic Yards, Tons, and Bags: A Material Conversion Guide
How to convert between cubic yards, tons, and bags for gravel, sand, soil, and mulch — with the density figures and formulas that make the math work.
- What Happens If You Overload Your Truck?
Overloading a pickup risks tickets, tire blowouts, brake failure, frame damage, and a voided warranty. Here is what actually happens and how to stay legal and safe.